Close
3W LED MCPCB
3W 35mm Dia MCPCB 1.6mm with LED
Close
3W POWER DRIVER
3W Power Driver module for MCPCB LED Board
Close
4-5W POWER DRIVER
4-5W Power Driver module for MCPCB LED Board
Close
5W LED MCPCB
5W-50mm Dia MCPCB 1.6mm with LED
Close
6-7W POWER DRIVER
6-7W Power Driver module for MCPCB LED Board
Close
7W LED MCPCB
7W-50mm Dia MCPCB 1.6mm with LED
Close
8-9W POWER DRIVER
8-9W Power Driver module for MCPCB LED Board
Close
A3PE1500 ProASIC3 Starter Kit FPGA Evaluation Board
A3PE1500 ProASIC3 FPGA Evaluation Board
Close
ANC headphone
Active noise cancellation (ANC)
Close
Anvyl™ Spartan-6 FPGA Development Board
IC:Xilinx Spartan-6® LX45 (XC6SLX45-CSG484-3)
Close
Any value/0402/1%
Value:Any Values
Close
Any value/0603/1%
Value:Any Values
Close
Any value/0805/1%
Value:Any Value
Close
ARDUINO MEGA 2560 REV3
ARDUINO MEGA 2560 REV3 - Tech Specification
| Microcontroller | ATmega2560 | |
| Operating Voltage | 5V | |
| Input Voltage (recommended) | 7-12V | |
| Input Voltage (limit) | 6-20V | |
| Digital I/O Pins | 54 (of which 15 provide PWM output) | |
| Analog Input Pins | 16 | |
| DC Current per I/O Pin | 20 mA | |
| DC Current for 3.3V Pin | 50 mA | |
| Flash Memory | 256 KB (ATmega328P) of which 0.5 KB used by boot loader | |
| SRAM | 8 KB (ATmega328P) | |
| EEPROM | 4 KB (ATmega328P) | |
| Clock Speed | 16 MHz | |
| LED_BUILTIN | 13 | |
| Length | 101.52 mm | |
| Width | 53.3 mm | |
| Weight | 37g | |
Close
ARDUINO NANO R3 BOARD CH340 CHIP
ARDUINO NANO R3 BOARD CH340 CHIP
Close
Arduino Uno
Arduino Uno
Close
ATMega32L 8-bit AVR Microcontroller
ATMEGA32L-8PU
Close
Basys™2 Spartan-3E FPGA Board
IC:Xilinx Spartan 3E FPGA, 100K gates
Close
Bluetooth HC-05
Wireless Bluetooth HC-05
Close
BLUETOOTH V4.0 HM-11
BLUETOOTH V4.0 HM-11
Close
Buck Switching Regulator IC- LM2675M-ADJ
Regulator IC - LM2675M-ADJ
Close
Cerra 10W cool white bulb
Cerra 10W cool white bulb
Close
Cerra 5W cool white bulb
Cerra 5W cool white bulb
Close
Cerra 7W led cool white bulb
Cerra 7W led cool white bulb
